Imprimer

Laboratory furniture, laboratory benches, Kitlab®

Fournisseur: EQUIP LABO
Ratings: Ecrire un avis

Total Evaluation: 0
Moyenne des Notes : 0.0 sur 5

8160 8157 8197 8196 8153 8107 8100 8685 8657 8668 9036 9012 9011 9010 9014 9005 9015 9000 9006 9032 9013 9019 9018 9017 9016 8305 8304 8300 8103 8137 8150 8117 8127 8696 8650 8050 8027 8077 8057 8007 8170 8187 8180 8177 8167
132-7781EA 973 EUR
132-7781 132-7873 132-7794 132-7784 132-7790 132-7859 132-7775 132-7713 132-7770 132-7771 132-7759 132-7829 132-7828 132-7827 132-7836 132-7750 132-7837 132-7745 132-7751 132-7755 132-7830 132-7858 132-7840 132-7839 132-7838 132-7877 132-7864 132-7764 132-7785 132-7863 132-7780 132-7860 132-7862 132-7714 132-7710 132-7705 132-7762 132-7767 132-7765 132-7760 132-7782 132-7876 132-7783 132-7875 132-7874
Laboratory furniture, laboratory benches, Kitlab®
Furniture Tables and Workbenches
Frame:
30×30-mm metal base frame, protected by a white baked epoxy resin, fitted with level adjustment gas lift columns
Rear strip and a fluid back panel, with water resistant melamine on both sides, with all borders veneered
Metallic tube stop bar protected by a white epoxy resin

  • 30 x 30-mm metal base frame, protected by a white baked epoxy resin, fitted with level adjustment gas lift columns
  • Rear strip and a fluid back panel, with water resistant melamine on both sides, with all borders veneered
  • Metallic tube stop bar protected by a white epoxy resin

Front strip:
Laminate Oslo blue (on request: white, yellow, broom or grey)

Worktop with five possible surfaces:
White 12/10 post-formed laminate on the front edge
Trespa® Athlon® resin (thickness: 8 mm) on chipboard support (thickness: 22 mm), white surface and a PVC border
Stoneware slab (thickness: 8 mm) on a water-resistant support (thickness: 22 mm) with a PVC border
Tempered unleaded enamelled glass — 'ice' colour — with a thickness of 6 mm on a water resistant chipboard support (thickness: 22 mm), a white PVC border (thickness: 4 mm), flexible seal between the glass and the support

Bare benches (composition):
1 fluid back panel
2 metal legs
1 dry worktop
1 laminate front strip
1 rear strip
1 stop bar
2 or 3 extensions for 750 mm deep benches with 600 mm legs
The 750 mm deep bench is equipped as standard with a 600 mm base, which cannot accommodate a splashback shelf. To add a splashback shelf, a 750 mm base is required.

Dry benches with splashback shelf (composition):
1 fluid back panel
2 metal legs
1 dry worktop
1 laminate front strip
1 rear strip
1 splashback, water resistant melamine on both sides, on a high density chipboard support, which can accommodate plumbing fixtures and electrical sockets
2 or 3 veneer shelf supports
1 white, water resistant melamine shelf on two sides, Oslo blue borders, 160 mm width (10 mm front edge)
1 metallic stop bar

Conforms to the AFNOR 15201 standard.

Certifications: Conforms to the AFNOR 15201 standard.

Informations de livraison: Supplied as a ready-to-assemble, flat-pack kit. The mounting fittings as well as the delivery fittings are automatically provided for all standard benches.
Commander maintenant

Learn more

About VWR

Avantor is a vertically integrated, global supplier of discovery-to-delivery solutions for...

Plus About VWR